LT-100 Liquid Metal Thermal Compound - 128 W/m·k High-Performance Cooling Grease
Elevate your system's thermal efficiency with the LT-100 Liquid Metal Thermal Grease. Designed specifically for hardcore PC enthusiasts, overclockers, and professional builders, this liquid metal compound offers a revolutionary leap in heat dissipation compared to traditional silicone-based pastes. Whether you are performing a delicate CPU delidding procedure or seeking the ultimate thermal interface between your high-end processor and cooler, the LT-100 provides the extreme thermal headroom needed to push your hardware to its absolute limits while maintaining stability.
Key Benefits
- Extreme Thermal Conductivity: Featuring an industry-leading conductivity of 128 W/m·k, this liquid metal ensures near-instantaneous heat transfer from the silicon die to your cooling solution, drastically reducing core temperatures under heavy loads.
- Ultra-Long Durability: Engineered for longevity, this compound eliminates the need for frequent maintenance. Once applied, it remains effective for the long haul without the "pump-out" effect common in standard greases.
- Minimal Volatilization: Boasting a volatilization rate of less than 0.001%, the LT-100 stays stable under extreme heat conditions, ensuring the material does not dry out or lose its physical properties over years of use.
- Optimized for CPU Delidding: The specialized formula is the ideal choice for "opening the cap" of modern CPUs, replacing factory-applied thermal interface materials with a superior liquid metal layer for maximum overclocking potential.
- Certified Safety Standards: This product is formulated to be safe and non-toxic, carrying the European Union RoHS certification to ensure it meets strict environmental and safety regulations.
Key Specs
- Thermal Conductivity: 128 W/m·k
- Net Weight: 1.5g
- Volatilization Rate: < 0.001%
- Shelf Life: 8+ Years
- Certification: RoHS Compliant
How to Use
- Surface Preparation: Thoroughly clean the CPU die and the heatsink contact surface with high-purity isopropyl alcohol. Ensure both surfaces are completely dry and free of oil or old residue.
- Insulation Protection: Since liquid metal is electrically conductive, you must protect the surrounding electronic components. Apply a thin layer of insulating coating or Kapton tape around the CPU die to prevent accidental short circuits.
- Application: Dispense a very small, pea-sized drop of LT-100 onto the center of the surface.
- Spreading: Use a specialized applicator, lint-free swab, or small brush to spread the metal into a thin, uniform, mirror-like layer. Ensure the entire contact area is covered with a microscopic film.
- Heatsink Mounting: Carefully place your cooler onto the treated surface. Note that this product is only compatible with copper or nickel-plated copper heatsink bases.
Care & Safety
- Conductivity Warning: This material is highly electrically conductive. Do not allow the grease to come into contact with motherboard traces, pins, or any exposed electrical contacts.
- Material Compatibility: NEVER use this product with aluminum heatsinks. Liquid metal will cause a rapid chemical reaction (gallium embrittlement), leading to permanent structural damage and corrosion of the aluminum.
- Storage: Store the syringe in a cool, dry place away from direct sunlight. Ensure the cap is tightly sealed after every use to prevent contamination.
- Handling: Keep out of reach of children. While non-toxic, avoid direct contact with skin and eyes.
Notes
"The shelf life can be more than 8 years;"
